|
Draining water out of a Mach 2 Hull
The Mach 2 has small drain holes in each bulkhead. These little holes allow water to flow through the boat so it can be emptied via the bung holes in each tank. The image below should make it easier for Mach 2 sailors to empty any water that may get into the boat.
All internal drain points are circled in red
Caring for your foils...
We want to advise you that extremely high temperatures can have a detrimental affect on foils. If you sail in typically hot enviroments, or are planning on attending events in hot climates please be aware that your foils are highly technical pieces of equipment and accordingly care is need in looking after them.
Mach 2 foils are a pressurised and sealed unit. Adverse temperatures can damage this product.
Keep foil temperature under 50 degrees”
Note: Typically foils can easily exceed this temperature by:-
Leaving in a car
Exposing to direct sunlight
Leaving out in high ambient temperatures with no air movement”
please contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
if you require more information.
Care is need t keep your new Mach 2 in tip top condition. In order to maintain the performance of your boat Mach 2 Boats will provide:-
- First time assembly guidelines
- Care and maintenance guides
- Tuning Guides
- Transporatation guides
Warranty
All Mach 2 boats come with a 2 year warranty which warrants that the boat and its associated parts will be free from defects in materials and workmanship for the Warranty Period under conditions of "reasonable use"
Mach 2 Boats is not liable to the buyer for damage caused to the boat and its associated parts by:-
- wear and tear
- accident
- vandalism
- neglect
- inproper set up
- modification
- non approved repair
- transportation damage
- Storage damage
The warranty policy may be transferred with the boat upon the sale to a third party only with the consent of Mach 2 Boats.
|
